Sony Cyber-shot DSC-P7 Operating Instructions Manual page 60

Before operation
Set [MOVING IMAGE] to [MULTI
BURST] in the SET UP settings (pages 52,
93).
Control button
MENU
a Set the mode dial to
b Press MENU.
The menu appears.
c Select
(INTERVAL) using
b/B, then select the desired
between-frame interval using
v/V.
You can choose the between-frame
interval from among the following.
NTSC: 1/7.5 sec., 1/15 sec., 1/30 sec.
PAL: 1/6.3 sec., 1/12.5 sec., 1/25 sec.
60
Mode dial
Shutter button
d Press the shutter button.
To delete shot images
When using this mode, you cannot delete
.
only certain frames. When you delete
images, all 16 of the frames are deleted at
the same time.
1 Set the mode dial to
2 Press MENU and select [DELETE], then
press the center z.
3 Select [OK], then press the center z.
All of the frames are deleted.
• When you play back images recorded in Multi
Burst mode, the 16 frames will be played back
in order, with a fixed interval between them.
• When the images are played back on a
computer, the 16 frames you shot will all be
displayed at the same time as part of one image.
(For information on NTSC/PAL, see
page 92.)
1/30
1/7.5
1/15
1/30
WB INTERVAL
16 frames will be recorded as one
image (image size: 1280×960).
.
• When Multi Burst images are played back on a
camera without the Multi Burst feature, the 16
frames will all be displayed at the same time, as
part of one image, just as they are on a
computer.
• For the number of images that can be recorded,
see page 88.
• The flash cannot be used.
• The date and time cannot be inserted.