Setting The Date And Time - Sony Cyber-shot DSC-P7 Operating Instructions Manual

Setting the date and time

Mode dial
1
, Set the mode dial to
• You can also carry out this operation when the
mode dial is set to SCN,
• To change values for the time and the date that
have been previously set, set the mode dial to
SET UP, select [CLOCK SET] in [SETUP 1]
(page 93), then proceed from Step 3.
16
POWER
ON/OFF(CHG)
2
, Press POWER.
.
The POWER lamp lights in green and the
CLOCK SET screen appears.
, or .
CLOCK SET
Y/M/D
M/D/Y
D/M/Y
2002 / 1 / 1 12 : 00 O K
AM
CANCEL
OK
POWER
CLOCK SET
2002 / 1 / 1 12
OK
3
, Select the desired order for the
date, the month and the year
using v/V on the control
button, then press the center
z.
You can select from [Y/M/D] (year/month/
day), [M/D/Y], and [D/M/Y].
• If the rechargeable button battery, which
provides the power for saving the time data,
ever loses its charge (page 95), the CLOCK
SET screen automatically reappears. If this
happens, reset the date and time by following
the above procedure, starting from Step 3.
Y/M/D
M/D/Y
D/M/Y
: 00 O K
AM
CANCEL