Getting Started - Sony CPD-300SFT Operating Instructions Manual

Getting Started

This monitor will sync with any IBM or compatible system
equipped with VGA or greater graphics capability.
Although this monitor will sync to other platforms running
at horizontal frequencies between 30 and 86 kHz, including
Macintosh and Power Macintosh system, a cable adapter is
required. Please consult your dealer for advice on which
adapter is suitable for your needs.
Step 1: With the computer switched off, attach the video
signal cable to the monitor (HD15/5 BNC's) and
attach the other end to the video card.
IBM or Compatible
Computer
to video output
HD15 - HD15 adapter (not supplied)
may be required
Apple Computer
to video output
Macintosh adapter
(supplied)
IBM or Compatible
to video output
Computer
HD15 - HD15 adapter (not supplied)
may be required
Apple Computer
to video output
Macintosh adapter
(supplied)
4
Notes :
Step 2: With the monitor switched off, attach the power
to a wall outlet
to HD15
Step 3: Turn on the monitor and computer.
Video signal cable
(supplied)
Step 4: Switch the input connector according to the
Step 5: If necessary, adjust the user controls according to
For the customers using the Windows
Even if you select SONY for the maker on the device select
screen, the model name (CPD-300SFT) may not appear.
In this case, select the DDC standard monitor.
The installation of your monitor is complete. Enjoy your
monitor.
Notice
To comply with the limits of FCC Class B and IC Class B for
to
digital device, please attach the supplied video signal cable
VIDEO IN R/G/B
SYNC IN HD/VD for HD15 input or SMF-400 (sold separately) for BNC input.
Furthermore, each cable has ferrite cores on it.
Video signal cable
SMF-400
(sold separately)
Use a HD15 (Female) - HD15 (Male without the No.9 pin)
adapter (not supplied) for any current DOS computer
which is not compatible with DDC 2AB and its No.9 pin is
disconnected.
Supplied Macintosh adapter is compatible with Macintosh
LC, Performa, Quadra and Power Macintosh series
computers. Macintosh II series and some older version of
PowerBook models may need an adapter with micro
switches.
cord to the monitor and the other end to the power
outlet.
Power cord (supplied)
adjustment procedure on page 9.
your personal preference.
® 4) 95