Adjustments - Sony CPD-300SFT Operating Instructions Manual

Adjustments

When one of the preset-type signals is input, no picture
adjustment is necessary.
You can, however, adjust the picture to your preferences by the
following procedure described below.
You can adjust all the items on the OSD (On Screen Display).
The item to be adjusted is indicated in white on the OSD.
Control Panel
RESET COLOR
Adjusting the Picture Brightness
The adjustment data becomes the common setting for all input
signals.
1
Press the ¨ ?// button.
The "BRIGHTNESS/CONTRAST" OSD (On Screen
Display) appears.
BRIGHTNESS/CONTRAST
2
Press the ¨ ?// buttons to adjust picture brightness.
? . . . for less brightness
/ . . . for more brightness
The "BRIGHTNESS/CONTRAST" OSD disappears 3 seconds
after you release the buttons.
To reset, press RESET button while the OSD is on.
Adjusting the Picture Contrast
The adjustment data becomes the common setting for all input
signals.
1
Press the > >/. button.
The "BRIGHTNESS/CONTRAST" OSD (On Screen
Display) appears.
BRIGHTNESS/CONTRAST
2
Press the > >/. buttons to adjust picture contrast.
> . . . for more contrast
. . . . for less contrast
The "BRIGHTNESS/CONTRAST" OSD disappears 3 seconds
after you release the buttons.
To reset, press RESET button while the OSD is on.
6
GEOM SIZE CENTER
CONV
2 3 0
8 0 . 0 kHz/75Hz
Horizontal Vertical
frequency frequency
2 3 0
8 0 . 0 kHz/75Hz
Horizontal Vertical
frequency frequency
p
Before adjusting the items, turn on the unit and feed the
video signal from the connected computer/work station.
p
Adjustments will be stored automatically.
POWER
SAVING
Adjusting the Picture Centering
The adjustment data becomes the individual setting for each
input signal received.
1
Press the CENTER button.
The "CENTER" OSD (On Screen Display) appears.
CENTER
2
For vertical picture adjustment
Press the > >/. buttons.
> . . . to move up
. . . . to move down
For horizontal picture adjustment
Press the ¨ ?// buttons.
? . . . to move left
/ . . . to move right
To erase the "CENTER" OSD, press the CENTER button again.
The "CENTER" OSD automatically disappears 10 seconds after
you release the buttons.
To reset, press RESET button while the OSD is on.
The horizontal and vertical frequencies for each input signal
received appear on the "BRIGHTNESS/CONTRAST" OSD.
CENTER
0 2 3