Workout Status; Route Back - Huawei WATCH FIT 2 User Manual

Before you start
To use this feature, update the device and the Huawei Health app to their latest versions.
•
The RAI feature is only available for outdoor running and running courses that last for
•
more than 12 minutes. Indoor running is not supported.
Viewing the RAI
On the device:
•
1
Go to Settings > Watch face & home > Home, and select Grid to display the apps in
grid view.
2
Touch to view the RAI.
Phone:
•
Open the Huawei Health app, go to Exercise > Outdoor run > Total distance run (km),
select a running record, and touch Graph to view your fitness data such as RAI, pace zone,
and training load level.

Workout status

Enter the watch's app list, touch Workout status, and swipe up on the screen to view data
including your recovery status, training load, and VO2Max.
Your training load from the last seven days can be viewed to determine your level based on
•
your fitness status. The watch collects your training load from workout modes that track
your heart rate.
VO2Max data can be obtained from outdoor running workouts.
•

Route back

When you start an outdoor workout and enable the Route back feature, the device will
record the route you took and provide you with navigation services. After reaching your
destination, you can use this feature to find out how to return to where you passed through
or came from.
On your device, enter the app list, then swipe until you find Workout and touch it. Start an
individual outdoor workout session. Swipe left on the screen and select Route back or
Straight line to return to the starting point. If there is no Route back or Straight line on the
screen, touch the screen to display it.
Exercise
17