Message Management - Huawei WATCH FIT 2 User Manual

3
Touch √ in the upper right corner (for ) or touch Save (for ) to finish configuring the
settings.
4
Return to the home screen and swipe down to sync the alarm settings to your device.
5
Touch an alarm to delete it or modify the alarm time and repeat cycle.
Alarms are synced between your device and the Huawei Health app.
•
When the alarm vibrates, touch
•
device to snooze (for 10 minutes). Touch
its own if no other operations are performed for one minute or the alarm has snoozed
on its own three times.

Message management

When the Huawei Health app is connected to your device, and the message notifications are
enabled, messages pushed to the status bar of your phone can be synced to your device.
Enabling message notifications
1
Open the Huawei Health app, touch Devices and then your device name, touch
Notifications, and turn on the switch.
2
Go to the app list and turn on the switches for apps that you want to receive notifications
from.
You can go to Apps to view the apps that you can receive notifications from.
Viewing unread messages
Your device will vibrate or ring to notify you of new messages pushed from the status bar of
your phone.
Unread messages can be viewed on your device. To view them, swipe up on the home screen
to enter the unread message center.
Replying to messages
This feature is not supported for iOS phones.
When receiving a message on your watch, you can swipe up on the screen and select a quick
reply.
Customizing quick replies
This feature is not supported for iOS phones.
You can customize a quick reply as follows:
1
Connect your device to the Huawei Health app, open the devices details screen, and touch
the Quick replies card.
, then swipe right or press the side button of your
to stop the alarm. The alarm will stop on
Getting Started
10