Measuring Blood Oxygen Levels (Spo2) - Huawei WATCH FIT 2 User Manual

Open the Huawei Health app, touch the Cycle Calendar card, and grant the corresponding
permissions. If you are unable to find the Cycle Calendar card on the home screen, touch
EDIT on the home screen to add this card to the home screen.
Method 1: On the device's home screen, press the side button, select Cycle Calendar, and
touch to set the start and end of your period. After being set, your device will
intelligently predict your next period based on the data you recorded.
Method 2:
1
Open the Huawei Health app, go to the Cycle Calendar screen, go to
Calendar settings in the upper right corner, select Period length or Cycle length, and
you can enable reminders for Start of period, End of period, Start of fertile window,
and End of fertile window in Reminders. You can also enable All.
2
The device will send you reminders for the start and end of your period and fertile
window.
Touch Records to view and modify the period data. The predicted period is marked
•
with a dotted line.
The device will remind you about the start of your period at 8:00 AM on the day
•
before it's supposed to start. You will be reminded about all other reminders for the
day of the event at 8:00 AM on that day.

Measuring blood oxygen levels (SpO2)

Single SpO2 measurement
Wear your device properly, press the side button to enter the app list, swipe down on the
screen, and touch SpO2 to start measuring your SpO2. After the measurement is complete,
Test again will be displayed at the bottom of the screen.
For more accurate results, it is recommended that you wait three to five minutes after
•
putting the device on before measuring your SpO2.
Keep still and make sure the device fits relatively tightly during the measurement, but
•
avoid wearing it directly over your wrist bone. Ensure that the heart rate sensor is in
contact with your skin and that there are no foreign objects between your skin and the
device. The screen also needs to stay facing up.
This measurement may also be affected by some external factors such as low ambient
•
temperatures, arm movements, or tattoos on your arm.
The results are for reference only and are not intended for medical use.
•
The measurement will be interrupted if you swipe right on the device screen, receive an
•
incoming call, or an alarm goes off.
Health Management
> Cycle
23