Backup, Restore, Upgrade, And Other System Operations - Check Point QUANTUM SPARK 1500 Administration Manual

Backup, Restore, Upgrade, and Other System Operations

Device System Operations
In the >
Reboot
n
Restore factory default settings.
n
Revert to the factory default image and settings.
n
Automatically or manually upgrade the appliance firmware to the latest Check Point version.
n
Revert to earlier firmware image.
n
Backup appliance settings to a file stored on your desktop computer.
n
Restore a backed up configuration.
n
To reboot the appliance:
1. Click Reboot .
2. Click OK
in the confirmation message.
To restore factory default settings:
1. Click Default Settings
2. Click OK
in the confirmation message.
The factory default settings are restored. The appliance reboots to complete the operation.
Note - This does not change the software image. Only the settings are restored to their default
values (IP address 192.168.1.1 , WebUI address https://192.168.1.1:4434 , the
username admin and the password admin ).
To revert to the factory default image:
1. Click Factory Defaults
2. Click OK
in the confirmation message.
The factory default settings are restored. The appliance reboots to complete the operation.
Note
- This restores the default software image which the appliance came with and also the default
settings (IP address https://192.168.1.1:4434 , the username is admin , and the password
is admin ).
To make sure you have the latest firmware version:
Check now
Click .
To automatically upgrade your appliance firmware when Cloud Services is not configured:
1. Click Configure automatic upgrades
The Automatic Firmware Upgrades window opens.
2. Click Perform firmware upgrades automatically
Quantum Spark 1500, 1600 and 1800 Appliance Series R80.20.25 Locally Managed Administration Guide | 91
page you can:
.
.
.
Backup, Restore, Upgrade, and Other System Operations
.