Sony AVD-S10 Operating Instructions Manual page 22

AM
COAXIAL
FM
75
ANT
If you connect a digital satellite receiver with the TV/SAT (OPTICAL DIGITAL IN)
jack
The digital satellite receiver can be connected to the TV/SAT (OPTICAL DIGITAL IN) jack
instead of the TV/SAT (AUDIO L/R IN) jacks of the system.
The system can accept both the digital and analog signals. Digital signals have priority over
analog signals. If the digital signal ceases, the analog signal will be processed after 2 seconds.
If you connect a digital satellite receiver without the TV/SAT (OPTICAL DIGITAL
IN) jack
Connect the digital satellite receiver to the TV/SAT (AUDIO L/R IN) jacks only of the system.
Setup for the system (for Asian models)
Setup is necessary for the system, depending on the TV monitor to be connected.
The initial setting for Asian models is NTSC.
If the colour system of the TV is PAL*
To set the system to PAL, turn on the system by pressing [/1 on the remote while pressing X
(pause) button on the system. You need to hold the X button until AVD-S10 appears on the
display. To reset to NTSC, turn off the system and then turn on again using the remote while
pressing the X button on the system.
* If the colour system of the TV is NTSC, do the same operation above to set the system to
NTSC.
Connecting the AC Power Cord (mains lead)
Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains),
connect the speakers to the system (see page 17).
Connect the AC power cord (mains lead) of your TV/video components to a wall outlet (mains).
GB
22
MONITOR OUT COMPONENT VIDEO OUT (DVD ONLY)
Y P /C P /C
B B R
S VIDEO OUT S VIDEO IN S VIDEO IN S VIDEO
AUDIO OUT AUDIO IN AUDIO IN AUDIO IN
OPTICAL OPTICAL OPTICAL
(CD ONLY) DIGITAL IN DIGITAL IN
L
R
VIDEO TV/SAT AUX MD/DAT TV/SAT
DIGITAL OUT
IN OUT
S VIDEO S VIDEO
IN IN
AUDIO AUDIO
IN IN
L L
R R
VCR
SPEAKERS
IMPEDANCE USE 6–16
FRONT CENTER
R L
R
+ + +
SUB
WOOFER
– – –
AUDIO
OUT
R L
OUT OUT
S VIDEO
IN
AUDIO
IN
L
OUTPUT
R
OPTICAL
Digital satellite receiver
SURROUND
R L
+
–
R L
IN
INPUT
S VIDEO
IN
TV monitor