Cisco IR1800 Installation Manual page 3

Overview
Single LTE Modem with Wi-Fi and GPS
1-Single LTE Modem (Cat 6 or below) + Wi-Fi Module + GPS Module
Figure 1: Use Case 1
In Use Case 1, Antenna 1 is a 2-in-1 with Wi-Fi, and Antenna 2 is a 3-in-1 with LTE and GPS.
Connections are made to the Router ports as follows:
Table 1:
Antenna
2-in-1
ANT-2-WLAN-D-O
3 ft cables (X2) with RP-TNC connectors.
3-in-1
4G-LTE-ANTM-O-3-B
4 ft cables (X3) with SMA Male connectors.
Where Connected
Both cables attached to Wi-Fi module in required
mode (single or dual-band, see port assignment).
One port to Main, One to Div, one to GPS Pluggable
Module.
Single LTE Modem with Wi-Fi and GPS
Cables and Accessories
CAB-L195-10RSPRTJ cables
(X2)
TNC extension cables for LTE
(X2)
LTE-ADPT-SM-TF (X2)
Antenna Installation Scenarios for the IR1800
3