Assembling The Hand Vacuum - Stihl SEA 20.0 Instruction Manual

English
► Insert the mains plug (5) in a convenient wall
outlet (6).
The charger (2) runs a self test. The LED (3)
glows green for about 1 second and then red
for about 1 second.
► Fit the connecting cable (4).
► Insert the battery (1) in the guides in the
charger (2) and press it home as far as stop.
The LED (3) glows or flashes green. The bat‐
tery (2) is being charged.
► When the LED (3) stops glowing: The battery
(1) is fully charged and can be taken out of the
charger (2).
► If the charger (2) is no longer required. Dis‐
connect the mains plug (5) from the wall outlet
(6).
6.3 Displaying State of Charge
1
► Insert battery.
► Press the button (1).
The LEDs emit green light for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.4 LEDs on the hand vacuum
The LEDs can indicate the state of charge of the
battery or any faults. The LEDs can be steady
green, steady red or flashing.
If the LEDs are steady or flashing green, this
indicates the state of charge of the battery.
► If the LEDs glow or flash red: Troubleshooting,
17.1.
Malfunction in hand vacuum or battery.
6.5 LED on Charger
The LED indicates the operating status of the
charger or faults. The LED can glow or flash
green or red.
If the LED glows or flashes green, the battery is
being charged.
► If the LED glows or flashes red: Troubleshoot‐
ing, 17.
There is a malfunction in charger or battery.
28
7
7.1
► Assemble the accessories and attach them to
Attaching and Removing the Brush Attachment
80-100%
60-80%
40-60%
20-40%
0-20%
Removing the brush attachment:
► Depress the retaining latch (1) and hold it
► Remove the brush attachment (2).
Attaching the brush attachment:
► Push the brush attachment (1) into the guides
8
8.1

7 Assembling the Hand Vacuum

Assembling the Hand Vac‐
uum
Attaching accessories
the nozzle.
1
2
depressed.
at the suction nozzle as far as it will go.
The brush attachment engages in position with
an audible click.
Removing and Fitting the
Battery
Fitting the Battery
2
1
0458-006-9821-B