Installation, Operation and Maintenance Manual
VCIOM-17109-EN Rev. 0
Section 2: Assembling Procedure
To assemble the OM3 Local Interface module onto the SCE300 actuator, proceed as follows:
•
Figure 1
Table 1.
Pos.
1
2
•
Figure 2
Assembling Procedure
Ensure that all the parts received with the OM3 are available, see Figure 1:
OM3 kit for SCE300 actuator
1
Q.ty
1
4
Gather the right tools for the assembly: a 5 mm Allen key and a screwdriver as
shown in Figure 2.
Tools for installing OM3 kit
Section 2: Assembling Procedure
Description
Local Interface module
Screws for connecting connector
May 2022
2
3