RADLEY 5131-001 Owner's Manual page 7

Extension cord
(A) Tie cord as shown
i) Make a knot as shown above.
ii) Use one of the plug-receptacle retaining straps or connectors described in
this manual.
10. Avoid unintentional starting. Do not carry plugged-in appliance with finger
on switch. Be sure switch is off when plugging in.
11. Do not abuse cord. Never carry appliance by cord or yank it to disconnect
from receptacle. Keep cord away from heat, oil, and sharp edges.
12. Do not force appliance. It will do the job better and with less likelihood of a
risk of injury at the rate for which it was designed.
13. Do not overreach. Keep proper footing and balance at all times.
14. Stay alert. Watch what you are doing. Use common sense. Do not operate
appliance when you are tired.
15. Disconnect the appliance from the power supply when not in use, before
servicing, when changing accessories such as blades, and the like.
16. Keep guards in place and in working order.
17. Keep blades sharp.
18. Keep hands and feet away from cutting area.
WARNING!
1. Do not allow garden waste to accumulate before shredding as it will begin to
compost, become too damp and clog the cutting assembly. Dry material will
help most material to clear the ejection chute. Save some dry sticks until last
to help clean the blade area.
2. Frequently monitor the buildup of shredded material.
3. Do not allow shredded material to build up and fill the inside of the shred-
der's discharge chute.
4. When the collection box is full, press the On/Off switch to turn the
Chipper/Shredder off before emptying.
WARNING! Do not put your hands up inside the shredder's discharge chute
to clear away shredded material while the shredder is switched on or connect-
ed to the power supply.
SAVE THESE INSTRUCTIONS FOR REFERENCE
Shredder cord
(B) Connect plug and receptacle
5131-001
6