Troubleshooting; Recycling And Disposal - RADLEY 5131-001 Owner's Manual

TROUBLESHOOTING

If your device is not operating properly, follow the instructions below. If this
does not solve the problem, please contact your local repair agent.
PROBLEM
Motor not running.
Material to be
chipped is not
pulled in.
WARNING! Before making any repairs or adjustments, make sure to turn
the switch Off and unplug.

RECYCLING AND DISPOSAL

1. Recycle unwanted materials instead of disposing of them as waste. All tools,
hoses and packaging should be sorted, taken to the local recycling centre,
and disposed of in an environmentally safe way.
2. Recycle rather than dispose of unwanted material in landfill whenever
possible. The machine is delivered in rigid packaging to avoid damage during
transportation, but the packaging, roller, and the machine itself are manufac-
tured from recyclable materials and should be disposed of accordingly.
3. Do not throw your clippings into a rubbish bin where it will be disposed of in
landfill. You can dispose of clippings on your compost heap, alternating them
with other garden material. Alternatively, many communities provide a public
collection point where you can dispose of your garden waste in an environ-
mentally friendly manner.
4. Recycle packaging where facilities exist.
PROBABLE CAUSE
1. No main voltage.
2. Cable faulty?
3. Was the motor
protection triggered?
4. Was the safety switch
triggered?
1. Material blockage?
2. Are the blades blocked?
3. Are the blades worn?
SAVE THESE INSTRUCTIONS FOR REFERENCE
CORRECTIVE ACTION
1. Check cable, plug, socket and fuse.
2. Contact your local repair agent.
3. Remove all chipped pieces and
press reset button.
4. Check the hopper-motor housing
connection.
1. Remove all chipped pieces from
the blades.
2. Remove all chipped pieces and
press reset button.
3. Replace the blades if necessary.
5131-001
16