RADLEY 5131-001 Owner's Manual page 16

NOTE: If body cover is not correctly fitted, and locking knob is not securely
tightened, the shredder can not be operated.
GENERAL MAINTENANCE
1. For maximum performance and longevity, keep the shredder clean and in
good working condition.
2. Inspect the switch and the power cord for damage before each use.
3. Check for damaged, missing, or worn parts. Check for loose screws, moving
parts that are jammed, or any other condition that may affect the operation.
4. If abnormal vibration or noise occurs, turn the chipper/shredder OFF
immediately and have the problem corrected before further use.
5. If damaged or performing abnormally, do not use the shredder until it has
been properly repaired, or replaced.
CLEANING
1. Wipe the outside of the shredder with a soft, dry cloth.
2. Remove the hopper from the housing body before washing the inside of the
hopper.
3. Do not hose the shredder down or wash it with water.
WARNING! To avoid injury, electric shock, or damage to the shredder, do
not allow any liquid to get inside the shredder.
WARNING! To avoid damage or electric shock, do not use strong solvents
or detergents on the plastic housing or the plastic components. Certain
household cleaners may cause damage and create a shock hazard.
READ ALL INSTRUCTIONS BEFORE USING THIS CHIPPER/SHREDDER
15
15 Amp Chipper/Shredder - Owner's Manual