RADLEY 5131-001 Owner's Manual page 13

body cover
feeding chute
Fig. 7
NOTE: If body cover is not correctly fitted, and locking knob is not securely
tightened, the shredder can not be operated.
OPERATION OF OVERLOAD PROTECTOR
If the machine is overloaded, the overload protector incorporated in the motor
will cut off the power to the shredder.
1. Leave the shredder for a few minutes, then press the overload protector to
reset the machine (Fig. 8).
2. Press the main switch to the ON position to restart the shredder.
3. If after above steps the shredder still can not be started, the motor protector
needs to be disconnected from the power circuit. Unplug the power cable
from the socket, wait for a few minutes, then plug it in and follow above
steps to restart the shredder.
USE PLUNGER
Use the plunger provided to help push the branches/stems down into the
feeding chute.
WARNING! The chipper/shredder has a tendency to pull branches/stems
into the machine. Do not try to impede entry of the material being cut once
feeding has started.
locking knob
SAVE THESE INSTRUCTIONS FOR REFERENCE
5131-001
overload
protector
Fig. 8
12