Symbols - RADLEY 5131-001 Owner's Manual

SYMBOLS

Some of the following symbols may be used on this product. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the product effectively and safely.
V Volts - Voltage
A Amperes - Current
Hz Hertz - Frequency (cycles
per second)
Class II Construction-Dou-
ble-insulated construction
Safety Alert-Precautions that
involve your safety
Hand Alert-Warning! Never
place hands into ejection
chute as serious injury will
occur.
The rotating part will
continuously run for several
seconds after you turn off the
machine.
READ THE OPERATOR'S
MANUAL(S) – Read,
understand and follow all
instructions in the user
manual(s) before attempting
to assemble and operate.
Always wear safety goggles
or safety glasses with side
shields, and as necessary a
full face shield as well as full
ear protection when
operating this product.
READ ALL INSTRUCTIONS BEFORE USING THIS CHIPPER/SHREDDER
3
15 Amp Chipper/Shredder - Owner's Manual
W
~
/min
Watts - Power
Alternating current - Type of
current
Per Minute-Revolutions,
strokes, surface speed, orbits,
etc., per minute.
CAUTION! Beware of stones
and other foreign objects that
could be thrown from the
product.
Keep bystanders and children
a safe distance (at least 11
yd/10 m) away from the work
area.
DANGER! Cutting/
dismemberment hazard -
Keep hands away from the
rotating blade.
Do not open or remove safety
shields while motor is
running.
WARNING! Turn the machine
OFF and disconnect it from
the power supply before
inspecting, cleaning,
changing accessories or
conducting any other
maintenance task.
Do not stand on the machine.