Opening Procedure For Lateral Passages; Removal Of Frontal Panel - Ariston NIMBUS 40 M EXT Technical Instructions

Attention
Before installation, check strength and horizontality of
the base. Based on the pictures, connect the base of the
external unit firmly to the ground, using suitable anchor
bolts (M10 x 2 pairs).
If the external unit should be exposed to significant air
flow, protect the fan using a protective screen and verify
the proper positioning and functioning.

1. Opening procedure for lateral passages

To allow the passage of cables, remove, with the help of a
screwdriver, the precut parts (A) of the chassis of the exter-
nal unit. To effectively remove the material, keep the front
panel of the unit installed.
Prior to the passage of the cables, place the black grom-
mets (B) provided within the document envelope.
A
B

2. Removal of frontal panel

Remove the screws that block the frontal panel and pull it
forward and down.
/ 71