Safety Regulations - Ariston NIMBUS 40 M EXT Technical Instructions

SAFETY REGULATIONS

CAUTION
This manual constitutes an integral and
essential part of the product. It must be kept
with care and accompany the product at all
times, whether in case of transfer to a new
owner / user or use on a new application.
Read the information and warnings given in
this manual in full; they are essential to the safe
installation, use and maintenance of the product.
Do not use the product for any purpose
other than that specified in this manual. The
manufacturer is not liable for damage resulting
from improper use of the product or failure to
install it as instructed herein.
All routine and extraordinary maintenance must
be done exclusively by qualified staff using
solely original spare parts. The manufacturer is
not liable for damage resulting
Key to symbols:
Failure to comply with this warning implies the
risk of personal injury, in some circumstances
even fatal.
Failure to comply with this warning may result
in serious damage to property, plants or ani-
mals.
The manufacturer is not liable for damage re-
sulting from improper use of the product or
failure to install it as instructed herein.
Install the appliance on a solid basement
which is not subject to vibration.
Noisiness during operation.
When drilling holes in the wall for installation
purposes, take care not to damage any elec-
trical wiring or existing piping.
Electrocution caused by contact with live wi-
res.
Damage to existing installations.
Flooding caused by water leaking from
damaged pipes.
Perform all electrical connections using wi-
res which have a suitable section.he electri-
cal connection of the product must be done
following the instruction manual in the relati-
ve paragraph.
Fire caused by overheating due to electrical
current passing through undersized cables.
Protect all connection pipes and wires in or-
der to prevent them from being damaged.
Electrocution caused by contact with live wi-
res.
Flooding caused by water leaking from dama-
ged piping.
Make sure the installation site and any sy-
stems to which the appliance must be con-
nected comply with the applicable norms in
force.
Electrocution caused by contact with live wi-
res which have been installed incorrectly.
Damage to the appliance caused by impro-
per operating conditions.
Use suitable manual tools and equipment
(make sure in particular that the tool is not
worn out and that its handle is fi xed pro-
perly); use them correctly and make sure
they do not fall from a height. Replace
them once you have fi nished using them.
Personal injury from the falling splinters or
fragments, inhalation of dust, shocks, cuts,
pricks and abrasions.
Damage to the appliance or surrounding
objects caused by falling splinters, knocks
and incisions.
Use electrical equipment suitable for its in-
tended use (in particular, make sure that the
power supply cable and plug are intact and
that the parts featuring rotary or reciproca-
ting motions are fastened correctly); use this
equipment correctly; do not obstruct passa-
geways with the power supply cable, make
sure no equipment could fall from a height.
Disconnect it and replace it safely after use.
Personal injury caused by falling splinters or
fragments, inhalation of dust, knocks, cuts,
puncture wounds, abrasions, noise and vibra-
tion.
Damage to the appliance or surrounding
objects caused by falling splinters, knocks
and incisions.
Make sure any portable ladders are positio-
/ 55