SCHEME WITH HYBRID BOILER AND A SINGLE SYSTEM FOR HEATING AND COOLING (HEATING-MODE OPERATION)
3
2
7
8
SCHEME WITH HYBRID BOILER WITH A SINGLE SYSTEM FOR HEATING AND COOLING (COOLING-MODE OPERATION)
3
2
7
8
NOTE: Installation with under-floor systems
For under-floor installations, make sure to install a safety device on the heating delivery circuit, as required by DTU 65.11. For the ther-
mostat hookup, refer to "Electrical connections".
If the delivery temperature is too high, the system stops in both domestic hot water and heating modes, and the remote control will
report error code 936 "Under-floor heating thermostat open". The system will start again when the manual re-arm thermostat is closed.
9
1
10
4
9
1
11
EP
10
4
Legend:
1.
Hybrid module
2. External unit
3. Outdoor sensor
4. Diverter valve
5. Low temperature heating zone
6. Sensys remote control and Sensys Net
7.
Filter
8. Anti-freeze cartridge
9. Combi boiler
10. Dirt separator filter
6
5
Legend:
1.
Hybrid module
2. External unit
3. Outdoor sensor
4. Diverter valve
5. Cooling zone
6. Sensys remote control and Sensys Net
7.
Filter
8. Anti-freeze cartridge
9. Combi boiler
10. Dirt separator filter
11. Expansion pot
6
5
/ 61