Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Hongda USA Manuals
  4. Toy
  5. L2121
  6. Instruction manual

Hongda USA L2121 Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Fairy Castle
Fairy Castle
L2121 Instruction manual
L2121 Instruction manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the L2121 and is the answer not in the manual?

Questions and answers

Related Manuals for Hongda USA L2121

Summary of Contents for Hongda USA L2121

  • Page 1 Fairy Castle Fairy Castle L2121 Instruction manual L2121 Instruction manual...
  • Page 2 Tips for assembling 1.Because this product contains small parts, children need to use this product with an adult to avoid accidental ingestion and cause suffocation hazard. There are sharp objects in the product, be careful not to pierce people to avoid injury. 2.After all the materials are used in the required amount in the operation steps, put the remaining materials back into the original bag until the installation is completed.
  • Page 3 Catalog Thumbnail of material list (reference only) Name of Name of Related materials bags Related materials bags accessories accessories A30,A31 of bag A(All printing paper and Printing paper template paper are concentrated on A30, Drum kit Bag M+Bag N+template paper &Template Page 18 total 2 sheets of A3 single-sided printing paper...
  • Page 4 A30-1 A30-1 A30-1 A30-1 A30-1 A30-2-2 A30-2-1 A30-2-3 A30-2-1 A30-2-2 Q02:16cm Poke the hole Turn it over and stick A30-3-3 A30-3-1 A30-3-2 the printing paper Q02:8cm A30-2-3 Poke the hole Cut out 8cm Q02, and then use D06 to wrap it up (Need 2 pieces) Follow the same method to make another rocking horse...
  • Page 5 Cut out A27, N04 and N06 according to the template before making A30-4 Q06:18cm N06-1 A27-1 N04-1 N04-1 N06-1 A27-1 N14-1 N14-1 N06-1 A30-4 A27-1 Fold in half according to the Stick together dotted line on the picture N04-1 Turn the part 3 over and stick it to N04, cut the excess fabric as shown in the picture, and then stick it Q06:9cm...
  • Page 6 Cut out N06 according to the template before making N06-4 N06-4 Q06:14cm N06-2 N06-2 N06-3 N06-3 Wrap H06 with cotton Q06:36cm Q07:5.5cm rope Q06 N06-3 N06-3 N06-2 Q07:2.5cm Q07:2cm Q06:22cm N06-2 Wrap H07 with 22cm-long Q06 in the same way Cut out N04 and N06 according to the template before making N06-5 N04-2...
  • Page 7 Cut out N04 and N06 according to the template before making N06-6 A27-2 N04-4 N04-4 N04-4 N06-6 N06-6 (Need 2 pieces) A27-2 A27-2 A30-6 A30-7-1 A30-7-2 Cut out a leaf in R07 A30-7-2 Cut out a leaf on R07 A30-7-1 (Need 2 pieces) and paste it Paste the dish as shown...
  • Page 8 Cut out N18 and N22 according to the template before making N18-3 N18-3 Q05:1.5cm P27:0.8cm N22-1 N22-1 Q05:1.5cm A30-9 A30-9 P27:0.8cm Cut out a short section of R07 and plug it in N21-1 N22-1 N22-1 Q05:1.5cm Q05:1.5cm Q05:1.5cm Follow the pink flower method to Roll up and fix make 2 yellow flowers A30-10...
  • Page 9 A24-3-1 A30-11 A30-11 A24-3 Q02:3.2cm A30-11 Cut out N19 according to the template before making Q02:0.8cm 0.2cm 0.2cm A24-3-2 A30-12-1 0.6cm (need 4 pieces) A30-12-2 N19-1 N19-2 Q09:1cm N19-3 N19-1 N19-2 Q02:4cm Q03:1.8cm N19-1 N19-2 N19-3 N19-1 N19-1 N19-1 N19-2 Paste N19 on the wood A30-12-1 A30-12-2...
  • Page 10 Q02:0.8cm 0.2cm 0.2cm 0.6cm (Need 5 pieces) Q03:1.8cm Cut Q09 into thin slices with a thickness of 0.1cm Bend the iron wire Q03 as shown A24-5 A24-5 A30-13-1 A24-4 A24-4 A30-13-2 A24-5 A24-5 A30-13-3 A24-4 A30-13-1 A24-4 A30-13-3 A30-13-2 A30-14-1 A30-14-2 A30-14-3 A24-6 A24-6 A24-6...
  • Page 11 K03 K03 A30-15 A30-15 Cut out N18 according to the template before making (need 6 pieces) A24-7-1 N18-5 0.3cm (Test the bulb before making the lamp) Use knife to cut off P01 N18-4 Light 0.3cm as shown N18-5 A24-7-1 N18-4 (Need 6 pieces) Cut out N18 according to the template before making A30-16-1...
  • Page 12 Light A30-17 Cut out N05 and N06 according to the template before making N05-1 A25-1 N05-1 N05-6 N05-6 N06-7 N06-7 N05-2 A25-1 Stick A25-1 to N05-1 as shown A25-2 N06-8 A25-3 A25-3 N05-7 N05-4 N05-4 A25-4 N05-3 A25-5 A25-5 N05-5 P10(5 pieces) N05-5 Cut the leather as shown...
  • Page 13 N05-7 N06-8 A25-4 (Need 2 pieces) Cut out N03, N04, N06 and N10 according to the template before making N06-10 N04-6 N04-5 A27-4 N03-1 N04-6 N06-9 N06-10 A27-3 A27-4 N03-1 Q01:8cm N10-1 N10-2 A30-18 A30-19 N10-3 N04-5 N06-9 N03-1 A27-3 Q01:8cm A30-18 N03-1...
  • Page 14 N10-2 N10-3 N10-3 N10-1 Follow the same method to make another P07(3 pieces) Cut out N13 according to the template before making A30-20 A30-20 A30-21 Fold along the dotted line Stick the printing paper to the cloth Cut out according to the template A30-21 N13-1 Q04:2.5cm...
  • Page 15 Q04:2.5cm Cut out N01 and N09 according to the template before making N01-1 L04 L04 Paste N01-1 and cut off the excess as shown Q04:3cm Q04:2cm Bend the iron wire into the shape N01-1 N01-1 N01-1 N09-1 on the picture as shown Q04:1cm Fold inward 0.2cm and Fold in half, then paste the pillow...
  • Page 16 Cut out N02, N03, N05, N06, N08, N09 and N15 according to the template before making A24-9 N06-12 A24-9 A30-22 A24-8 A24-8 N05-9 A24-11 N15-1 A24-9 N09-1 N09-1 A24-10 A24-9 A24-10 N02-1 N07-1 N06-12 N06-13 A24-11 N03-2 Cut off the excess N09-1 N02-1 N09-1...
  • Page 17 N15-1 A30-22 Cut out N15 and make a mark in the middle Cut out A27, N05 and N06 according to thetemplate before making A30-24 A30-23 N06-14 N05-10 A27-6 A30-25 Q04:2cm A30-23 A30-24 A30-25 Q04:2cm N05-10 N06-14 A27-6...
  • Page 18 Cut out A26 according to the template before making A24-12 A24-13 A30-27 A26-2 A24-12 A30-26 A24-13 A30-26 A26-2 A30-27 Q02:0.8cm A30-28 0.2cm 0.6cm Q02:3.2cm Q03:1.8cm (Need 4 pieces) Q03:1.8cm A30-28 Bend the iron wire Q03 as shown Cut out N18 according to the template before making P27:0.8cm N18-3...
  • Page 19 Cut out N18 according to the template before making A30-30 A30-29 A30-29 A30-29 A30-32 M07 M08 M09 N18-7 N18-7 A30-30 A30-31 A30-29 A30-29 A30-29 A30-32 M19 M19 (Note that the 2 polished corners are symmetrical) N18-7 Grind off Grind off N18-7 Grind off one corner of M10 Grind off one corner of M10 with...
  • Page 20 A30-37 Q04 :2.5 cm (Need make 3 pieces) A30-38 Bend the iron wire as shown in the picture Before making, cut out N18 according to the template A30-39 N18-8 Fold and glue A30-39 in half Cut it out as shown in the picture A30-39 Expand P15 along the middle...
  • Page 21 A24-16 A24-16 A24-16 A30-40 A30-41 A30-40 Fold it along the dotted line (Need make 2 pieces) A30-41 A24-16 (need 3 pieces) A30-42 A30-42 A30-43 A30-45 A30-43 A30-43 A30-45 A30-44 A30-44 A30-43...
  • Page 22 A30-44 A30-45 (Need make 2 pieces) Before making, cut out A26 according to the template paper A24-17 P09 P10 A30-47-2 A30-47-1 A30-50 A30-48-1 A30-48-2 A30-51 A26-3 A30-49-2 A30-49-1 A26-3 A30-47-1 A30-47-2 A24-17 Before making, cut out N15 according to the template paper N15-4 N15-4 N06-15...
  • Page 23 Before making, cut out N04 and N06 according to the template paper N06-16 N04-7 N06-16 A24-17-2 A30-52 N04-7 N04-8 A24-17-2 N04-8 N04-8 Fold it in half as shown in the picture A30-52 Wrap it as the picture shown Before making, cut out A27, N04 and N28 according to the template N04-9 N04-9 A27-8...
  • Page 24 A30-53 Q05:3cm A30-53 Fold it in half as shown in Paste the iron wire to A30-53 as the picture Cut out as shown in the picture Q05:2.5cm Q05:3cm shown in the picture Before making, cut out N16 and N17 according to N16-1 N16-1 N16-1 the template paper N16-1...
  • Page 25 Before making, cut out A26 according to the template A26-5 A26-7 A26-5 A26-6 (Need make 2 pieces) A26-6 A26-7 A26-7 A26-6 E21 E21 A30-57 (Need make 2 pieces) A30-56 A30-56 A30-57 Paste A22 on the printed paper A30-58 Q08:40cm A30-59 A30-59 A30-58 Q08:40cm...
  • Page 26 Before making, cut out A26 according to the template paper A26-8 A24-18 A24-19 A30-61-1 A30-61-2 A26-9 A26-8 A26-10 A30-60 A24-20 A30-62 (Need make 2 pieces) A26-9 A26-10 A30-60 A30-61-1 A30-62 A24-18 A24-19 A24-20 A30-61-1 A30-61-2 (Need make (Need make 2 pieces) 2 pieces)
  • Page 27 Before making, cut out N11 according to the template paper A30-64 A30-64 A30-63 A30-63 A30-63 A30-64 (Need make 2 pieces) N11-1 (Need make 2 pieces) A30-65 Pay attention to the Pay attention to the A30-65 alignment of the holes direct of the hole Pierce the hole Paste E01 to A16 Drumsticks...
  • Page 28 The chandelier made before A30-67 N01-2-2 Use same steps to make other one N01-2-1 Before making, cut out N01 according to the template paper A30-69 N01-3-1 N01-3-2 A30-71 A24-23 Fold and glue A30-71 in half as Note: When D06 can’t fit the beads, need poke the hole bigger first shown in the picture A30-70...
  • Page 29 Before making, cut out A26 according to the template paper A26-11 A30-73-2 A26-11 A26-11 A30-73-2 (Need make 2 pieces) A30-73-2 A30-74 A30-74 A30-74 C09(6 pieces) A30-75 C09 C09 C10 C10 A30-75 C09(5pieces) Stick to the wood-colored side A30-76 A30-76 (5pieces) Before making, cut out N18 according to the template paper A30-79 (Front view)
  • Page 30 A30-77 A26-13 N12-2 Stick to the wood-colored side A26-12 Double bed Note: the position of the wood color edge Hanging pictures made before A30-80 cabinet A30-80 Glue the hanging paintings (Wood color edge) made before on the wall Stick to the wood-colored side Before making, cut out N18 according to the template paper A30-82 A30-83...
  • Page 31 N20-1 A30-84 Cut out N20 according to the template Q02:5cm paper Tear off the blue film 0.9cm Q02:5.6cm A30-86 A30-85 Q02:2cm Large chandelier A30-87 A30-88 A30-89 A26-14 0.3cm N18-4 N18-8 N18-8 N18-8 cut it use knife as N18-5 shown in the picture A26-15 N18-4...
  • Page 32 A30-90 2.9cm 3.8cm 3.8cm 2.9cm Glue a piece of S01 A30-90-1 A30-90-2 A30-90-2 Hollow out the printing paper A30-91 A30-90-2 Turn over after sticking A18 to A30-90 A30-93 A30-92 Turn over after A19 is glued to A30-92 A30-94 Glue the big chandelier light as shown Glue the big chandelier light as shown...
  • Page 33 A30-95 Balcony 3 Outdoor Light Put on one of S01 A30-96 Balcony 2 Fillet Fillet If B17 cannot be placed in A08, cut the fillet of A08 into a right angle with a knife and polish the edge of B17 A30-97 A25-10 A25-6...
  • Page 34 A24-24 A24-25 A24-26 A30-99 A30-100 A24-27 A24-28 Turn over the printing paper A30-99 and stick on A24-24 A26-16 A30-100 A30-101 A30-102 A30-102 A30-103 Swimming pool A30-104 A30-105 Cover the wires with printed paper Stick on the swimming pool printing paper Glue the printing paper A30-104 to A01 Glue S02 as shown in the picture...
  • Page 35 Children's room Put the wire through A08 Glue the wires as shown Bedroom wall Cut out N28 according to N28-2 curtain Bathroom cabinet Plant 2 Toilet Glue the curtains as shown in the picture Note: Before arranging the Led, first test whether the light is normal Slippers Put on a Led lamp on the umbrella, and then Glue the wires as shown in the picture...
  • Page 36 Eevator Piano room Glue the wires according to the red wire Spire on the third floor Third floor Daylighting windows on the third floor Screen Base Glue the pet room and the wires at the Glue the base Pass the wire of the pet room through the panel A03 same time as shown in the picture Step 1 Gather the wires together as...
  • Page 37 upgraded version (Front view) (accessories need to be purchased separately) (back view) P01 music movement P02 movement handle P03 movement screws (1piece) (1piece) (3pieces) Wall cabinet Cupboard Kitchen floor Glue the wall cabinet to B02 Cat climbing frame Cat carpet Glue the wires according to the red wire Shaker sunflower...
  • Page 38 R10 R10 R10 R10 R08 R08 R08 R08 Cut R08 as shown, and then glue the top Cut out M24 according to template paperM24-1 Glue R08, R09, R10 and R11 as shown in Cut out M24 according to Cut R09 in half Cut the bottom of R12 flat the picture template paperM24-2...
  • Page 39 City gate P22 F20 F23 Flowers made before Glue the flowers made before random Blue LED light line Flowers made before White LED light wire Gray LED light wire Battery box red wire Battery box black wire Flowers made before Glue the flowers made before random Glue the flowers made before random How to assemble the battery holder...
  • Page 40 Installation of dust cover dust cover (Upgrade version accessories need to be purchased separat ely) Ripped one side of kraft paper, leaving one side of kraft paper scale:1:12 scale:1:12 scale:1:12 Take out the plexiglass and tear off the scale:1:12 Z01 plexiglass Z02 plexiglass Z03 plexiglass Z04 MDF(white)