Advertisement
Smartkits
Guide to Transformer Low Voltage Bushing
Replacement (No Handhole Replacement)
Issue 01 (2021-11-22)
NO TE
1. Find a screw hole on the short side of the box cover and place a nut on the screw hole.
2. Insert the screw into the screw hole and nut from top to bottom, rotate the screw, and
let the thread pass out from the bottom screw hole.
3. Install another nut at the bottom of the screw and tighten the two nuts.
4. Install another limiting screw in the same way on the short side of the other box cover.
Copyright © Huawei Digital Power Technologies Co.,
Ltd.
3 Replacement Procedure
20
Advertisement
