Soleus Air SOLEUSAIR SG-TTW-09ESE-26 Operating Instructions Manual page 15

Air Conditioner Features
(continued)
HEATING FEATURE
Note: This feature can be used with any combination of FAN Speeds, Timer, or Sleep Modes. When in the "Heat" Mode, the
fan will run continuously while heat is needed. The temperature will automatically be maintained anywhere between 61°F
(16°C) and 86°F (30°C). When the set room temperature is reached, the fan will cycle off and on to circulate and sample
the room air.
SLEEP FEATURE :
Note: Press this button, Sleep On and Sleep Off can be selected. When the unit is on,Sleep Off is defaulted. After the unit is shut
off, the Sleep function is canceled. If the unit is in Cool or Energy Saver Modes, and the Sleep Mode is set, the SET TEMP. will
increase 2*F in 1 hour and 4*F in 2 hours. If the unit is in Heat Mode, and Sleep Mode is set, the SET TEMP. would decrease 2*F
in 1 hour and 4*F in 2 hours.
TO TURN UNIT OFF :
FAULT CODES
:
(on some models)
MODE BUTTON
SELECT HEAT
DO THIS:
PRESS
MODE BUTTON
SELECT SLEEP
DO THIS:
ON/OFF BUTTOT
If the display reads "F1"
a sensor has failed.
If the display reads "F4"
a sensor has failed.
DO THIS:
PRESS
PRESS
If the display reads "F2"
a sensor has failed.
If the display reads "FJ"
a sensor has failed.
12
YOU WILL SEE:
:
YOU WILL SEE
YOU WILL SEE: