Ethernet And Audio Board - Alienware m15 R7 AMD Service Manual

Steps
1. Place the fan and heat-sink assembly on the system board.
2. Align the screw holes on the fan and heat-sink assembly to the screw holes on the system board.
3. In sequential order (1>2>3>4>5>6>), tighten the six captive screws (M2x4) that secure the fan and heat-sink assembly to the
system board.
4. Turn over the system-board assembly.
Next steps
1. Follow the procedure from step 6 to step 25 in installing the
board (NVIDIA GeForce 3050
2. Install the battery.
3. Install the rear-I/O cover.
4. Install the wireless card.
5. Install the 2230 solid-state drive
6. Install the 2230 solid-state drive
7. Install the base cover.
8. Follow the procedure in

Ethernet and audio board

Removing the ethernet and audio board
Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 2230 solid-state drive
Ti), whichever applicable.
or 2280 solid-state drive
or 2280 solid-state drive
After working inside your
Before working inside your
or 2280 solid-state drive
system board (NVIDIA GeForce 3060/3070 Ti/3080 Ti)
in slot one, whichever applicable.
in slot two, whichever applicable.
computer.
computer.
in slot one, whichever applicable.
or system
61