Name And Function Of Icons - Daikin BRC1E51 Quick Reference

4 UP/DOWN BUTTON
These buttons are used to raise/lower the set
temperature, to highlight the next item on the upper/
lower side or to change the selected item.
5 RIGHT/LEFT BUTTON
These buttons are used to highlight the next item on
the right/left-hand side or to enable the home leave
settings (when kept pressed for four seconds).
6 ON/OFF BUTTON
Push the ON/OFF button to start or stop the system.
NOTE This is the only button that works when the
backlight is not lit. All other buttons only
work when the backlight is lit.
7 OPERATION LAMP
The operation lamp lights up during operation or
blinks if a malfunction occurs.
8 CANCEL BUTTON
Push this button to return to the previous screen.
9 LCD (with backlight)
When pushing any operation button, the backlight will
be lit for approximately 30 seconds. When one indoor
unit is controlled by two remote controllers, the
backlight of the remote controller operated earlier
than the other one will be lit.
BRC1E51
Remote controller
4PW52905-1

4. Name and function of icons

To change between the Standard display and the
Detailed display refer to the chapter "How to select
the display" on page 25.
Standard display
11
10
Auto
1
Heat
2
3
This function not available
7
Detailed display
Auto
Heat
13
Return
1 OPERATION MODE
This indicates the current operation mode (Cool, Heat,
Vent, Fan, Dry, or Auto).
2 AUTOMATIC OPERATION MODE
This indicates the current automatic operation mode
(Cool or Heat).
12
8
Set temperature
20 4
°C
5
6
14
12 : 05
A
Set temp Room
20
20
15
°C
°C
Setting
Quick reference
14