The Kit Includes The Following Parts - Daikin BRC1E51 Quick Reference

When the remote controller thermo function
is used, select the installation location
considering it should be a place:
• where the average temperature in the
room can be detected,
• that is not exposed to direct sunlight,
• that is not near a heat source,
• that is not affected by outside air or air
draught due to e.g. door opening/closing,
• where the display is kept clean.
• where the front is kept clear.
• where the temperature is between -10°C
and 50°C.
• where the relative humidity is maximum
95%.
Do NOT install the remote controller:
• Near machinery emitting electromagnetic
radiation. Electromagnetic radiation may
disturb the operation of the control system
and result in a malfunction of the unit.
• In moist areas or places where it may be
exposed to water. If water enters the
remote controller, electric shocks may be
caused and the inner electronics may fail.
After finishing installation:
■
conduct a trial operation to check for faults,
■
explain the customer how to operate the remote
controller, using the Operation part of this Quick
Reference,
■
ask the customer to store the cd and the quick
reference for future reference. The cd contains
detailed installation and operation information.
BRC1E51
Remote controller
4PW52905-1
Warning
Consult your local dealer regarding relocation and
reinstallation of the remote controller. Improper
installation work may result in electric shocks, leaks
or fire.

2. The kit includes the following parts:

Remote controller
Small screws
Manual CD
Wiring retainer
Wood screws
Clamp
Quick Reference
Wall plugs
Quick reference
2