Reattach The Upper Part Of The Remote Controller; Power On - Daikin BRC1E51 Quick Reference

6. Reattach the upper part of the
remote controller
Be careful not to pinch the wiring when
attaching.
Refer to figure 3:
Align the upper case with the tabs of the lower case
(6 points), inset and install the upper case.
First begin fitting from the clips at the bottom.
NOTE 1. The switch
connection are not included.
2. Do not directly touch the PCB with
your hand.

7. Power on

1 Put on the power.
Connection under check Please wait for a moment is
2
displayed.
Off reminder Timer
Connection under check
Please wait for a moment
Main remote contrl
3 After a few seconds, the basic screen is
displayed.
BRC1E51
Remote controller
4PW52905-1
box and wiring for
If controlling one indoor unit or one group of
indoor units with two remote controllers
1 Put on the power for both remote controllers.
2 Determine which one is the sub/main remote
controller.
When Error code:U5 - Connection under check Please
3
wait for a moment is displayed on both remote
controllers, push and hold the
the sub remote controller for 4 seconds.
Error code:U5
Connection under check
Please wait for a moment
Main remote contrl
The sub remote controller now displays Sub
4
remote contrl.
Connection under check
Please wait for a moment
Sub remote contrl
NOTE The main remote controller still displays
Main remote contrl.
5 After a few seconds, the basic screen is
displayed.
button of
Quick reference
4