Possible Reasons For Increased Levels Of Foaming; Large Items Stretched; Continuing A Programme After An Interruption To The Power Supply - Miele PWM 912 Operating And Installation Instructions

Possible reasons for increased levels of foaming

Problem
Excessive foaming during
the wash cycle.

Large items stretched

Problem
Stretching of large items
during spinning

Continuing a programme after an interruption to the power supply

If a running programme is interrupted, e.g. by a power cut, the programme can be
continued when power is restored.
Switch on the washing machine with the  button.

Then press "START".

The programme will then continue with the next programme stage.
Possible cause and remedy
You are using an unsuitable detergent.
Only use detergent formulated for use in commercial

washing machines. Domestic laundry detergent is not
suitable.
You are using too much detergent.
Dispense detergent following the instructions on the

packaging and in accordance with local water hardness
levels.
You are using very soft water.
In areas with water hardness level 1, add less detergent

in accordance with the detergent manufacturer's
instructions.
The items of laundry are only slightly soiled.
For lightly soiled laundry, add less detergent in

accordance with the detergent manufacturer's
instructions.
There are residues in the laundry (e.g. from detergent).
Additionally, pre-rinse the laundry without setting a

temperature and without using detergent.
The load size is too small.
Reduce the amount of detergent.

The drum spin speed is too high during the wash cycle.
Reduce the drum spin speed and wash rhythm.

Possible cause and remedy
Large items can get stretched during spinning.
This can mostly be prevented by reprogramming.

Contact Miele Professional Service.
Problem solving guide
39