Polaris RZR Pro R 2022 Owner's Manual page 98

MAINTENANCE
TRANSMISSION
TRANSMISSION (MAIN GEARCASE)
Always check and change the fluid at the intervals outlined in the Periodic
Maintenance Chart section. Refer to the Gearcase Specifications Chart for
recommended lubricants, capacities and torque specifications.
FLUID CHECK
q
The fill plug is located on the right side of the gearcase. Maintain the fluid
level at the bottom of the fill plug hole.
1. Position the vehicle on a
level surface.
2. Remove the fill plug using a 8
mm Allen wrench..
3. Check the fluid level.
4. If necessary, add the
recommended fluid to the
bottom of the fill plug hole.
Do not overfill.
5. Reinstall the fill plug. Torque
to specification.
FLUID CHANGE
w
The drain plug
plug through the drain hole in the skid plate.
1. Remove the fill plug.
2. Place a drain pan under the
drain plug using a 8 mm
Allen wrench.
3. Remove the drain plug. Allow
the fluid to drain completely.
4. Clean the drain plug.
5. Reinstall the drain plug.
Torque to specification (listed
in the Gearcase Specification
Chart of this manual).
96
is located on the bottom of the gearcase. Access the drain