Polaris RZR Pro R 2022 Owner's Manual page 53

ALL WHEEL DRIVE (AWD) SYSTEM
The All Wheel Drive system is controlled by the AWD switch. Once the vehicle is
in gear, the switch is set to one of three driveline modes.
ICON
Engage the AWD switch before getting into conditions where all-wheel drive
may be needed. If the rear wheels are spinning, release the throttle before
switching to AWD.
Switching to AWD while the rear wheels are spinning or slipping may cause
severe drive shaft, prop shaft, and gearcase damage. Always switch to AWD
while the rear wheels have traction or are at rest.
DRIVELINE
MODE
All Wheel Drive
(AWD) Lock
All Wheel Drive
(AWD) Unlock
Two-Wheel
Drive (2WD)
FEATURES AND CONTROLS
DESCRIPTION
When in All-Wheel Drive Lock, the front
drive is engaged with the front differential
in the locked state. The locked state drives
all wheels at the same speed which will
increase steering effort and changes the
handling characteristics from the AWD
mode. If switched to AWD Lock when
vehicle speed, accelerator pedal position,
and engine RPM are above activation
limits, AWD Lock will not engage until
vehicle speed, accelerator pedal position,
and engine RPM are decreased.
When in All-Wheel Drive, the front drive is
engaged with the front differential in the
open state. The open state allows the front
wheels to spin at different speeds for
improved turning ability. If switched to
AWD Unlock when vehicle speed,
accelerator pedal position, and engine
RPM are above activation limits, AWD
Unlock will not engage until vehicle speed,
accelerator pedal position, and engine
RPM are decreased.
When the switch is set to 2WD the vehicle
is in two-wheel drive at all times.
NOTICE
51