Polaris RZR Pro R 2022 Owner's Manual page 142

Hide thumbs Also See for RZR Pro R 2022:
Table of Contents

Advertisement

MAINTENANCE
11. Verify that cables are properly routed.
12. Reinstall the seat.
BATTERY MAINTENANCE AND CHARGING
WARNING
The battery has been filled with electrolyte, fully charged and sealed at the
factory. Never pry the sealing strip off or add any other fluid to this battery.
Battery electrolyte is poisonous. It contains sulfuric acid. Serious burns can
result from contact with skin, eyes, or clothing.
The single most important thing about maintaining a sealed battery is to keep it
fully charged. Check the battery voltage with a voltmeter or multimeter. A fully
charged battery will register 12.8 V or higher. If the voltage falls below 12.5V,
charge it immediately, or the battery runs the risk of sulfation and reduced
battery life.
This vehicle is equipped with a vehicle battery
charge port located on the dash. This allows the
operator to charge the vehicle battery without
needing to access the battery under the driver's
seat.
If you do not drive the vehicle for more than TWO
WEEKS, Polaris recommends using a
BatteryMINDer® 2012 AGM - 2 AMP charger (PN
2830438), which can be ordered through your
dealer.
If you plan to store the vehicle for ONE MONTH or longer, remove the battery
from the vehicle, then store the battery in a cool and dry location. Continue to
maintain the battery with the BatteryMINDer® 2012 AGM - 2 AMP charger.
When using an automatic charger other than a BatteryMINDer® 2012-AGM - 2
AMP charger, refer to the charger manufacturer's instructions for recharging.
140

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents