Polaris RZR Pro R 2022 Owner's Manual page 46

FEATURES AND CONTROLS
4. Inspect tongue for proper operation by inserting into buckle. Tongue must
insert smoothly and you must hear an audible click. Verify proper latching by
tugging on belt. Tongue must not be worn, deformed or corroded.
Corrective Action: Replace entire belt system
5. Inspect shoulder web guide. Seat belt must move freely through shoulder
web guide. Shoulder web guides must be free of obstructions and must not
snag or wear webbing fabric.
Corrective Action: Adjust shoulder web guide hardware and/or remove
obstruction.
6. Inspect retractor operation (if equipped). When pulled and released slowly,
seat belt must spool out and retract without locking.
Corrective Action: Replace entire belt system
7. Inspect mounting hardware on all belt system attachment points. Hardware
should be tight. Hardware must not be missing, rusted, corroded or
damaged.
Corrective Action: Replace defective or missing hardware with authorized
parts and or tighten hardware.
8. If a harness is used to restrain a rider during an accident, that entire harness
system must be replaced. Inspect non-retractable harness pads containing
controlled deceleration technology for evidence of a blown fuse (e.g.,
exposed threading).
Corrective Action: Replace entire belt system
44