Specifications - Mitsubishi Electric PAC-ZC40L-E Installation Manual

11. Specifications

Weight
Allowable ambient temperature
Allowable ambient humidity
External dimensions (W x H x D)
Power Source
Operating conditions Temperature
Humidity
Weight
External dimensions (W x H x D)
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
32
Zone control interface
PAC-ZC40/80L-E: 2.5kg PAC-ZC40/80H-E: 2.7kg
0 to 60°C
80% RH or less
336 x 278x 69mm
Zone remote controller
17–32V DC
(for connection to M-NET only)
Operating temperature range
Storage temperature range
20%–90% RH (Non-condensing)
0.3kg (11/16 lbs)
140 x 120 (123) x 25 (28.8)mm
5-17/32 x 4-3/4 (4-27/32) x 1 (1-5/32) in
* The numbers in the parenthesis indicate the dimensions including the protruding parts.
Receives power from zone control interface via the M-NET transmission
cable.
0ºC – +40ºC (+32ºF – +104ºF)
-20ºC – +60ºC (-4ºF – +140ºF)