Example) If you want to set as "MAIN: 3, CHANNEL: 1, RMC: B",
SEG1
SEG2
0
A
SEG7
SEG8
1
Assign option codes except SEG 1, 7 which are page options.
Setting the installation options in a batch
1
Make sure that the power is supplied to the indoor unit. If the indoor unit is not plugged in, it must include a power supply.
2
The panel (display) should be connected to an indoor unit to receive option.
3
Set the installation option according to the installation condition of an air conditioner.
‐
The installation options of indoor units are set to like a below table by default.
Model
Installation option
‐
Individual control of a remote controller(SEG20) is the function that controls an indoor unit individually when there
is more than one indoor unit.
‐
No need to assign SEG3, 6, 9, 10, 16, 22, 23, 24 which are non applicable. Even though those segments are set, they
will be ignored.
‐
If you set the applicable segments with numbers other than the indiciated, the initial setting will be maintained.
4
Set the indoor unit option by wireless remote controller.
SEG3
1
SEG9
-
1
AC018BNADCH
020010-100011-200000-300000
SEG4
SEG5
-
-
SEG10
SEG11
-
1
AC024BNADCH
020010-100041-200000-300000
SEG6
3
SEG12
B
English
23