Samsung AC BNADCH Series Installation Manual page 22

Hide thumbs Also See for AC BNADCH Series:
Table of Contents

Advertisement

Indoor Unit Installation
Setting the indoor unit addresses
Option No. for an indoor unit address: 0AXXXX-1XXXXX-2XXXXX-3XXXXX
Before installing an indoor unit, be sure to set an address for the indoor unit by taking the following steps:
1
Make sure that the power is supplied to the indoor unit. If the indoor unit is not plugged in, it must include a power supply.
2
Set an address for each indoor unit using the remote control, according to your air conditioning system plan, by referring to
the following table and by following the steps in Common steps for setting the addresses and options on page 18.
The indoor unit addresses (main and RMC addresses) are set to 0A0000-100000-200000-300000 by default.
If indoor units and outdoor units match 1:1, you don't need to set the main address because it is automatically set
by the outdoor unit.
If you are using on or off controller, set RMC address.
Option
SEG1
Function
Page
Indication Details Indication Details Indication
Indication
and details
0
Option
SEG7
Function
Page
Indication Details
Indication
and details
1
CAUTION
The main address must be set to a value in the range 0 to 15. If you set other values, communication error will occur.
If any of SEG5 and SEG6 is set to a value in the range A to F, the main address of the indoor unit does not change.
If SEG3 is set to 0, the indoor unit maintains the existing main address even if SEG6 is set to a new value.
If SEG9 is set 0, the indoor unit maintains the existing RMC address even if SEG11 and SEG12 are set to new values.
22
English
SEG2
SEG3
Mode
Setting main address
Details
No main
0
address
A
Main address
1
setting mode
SEG8
SEG9
Setting RMC address
Indication
Details
Reserved
No RMC
0
address
RMC address
1
setting mode
SEG4
SEG5
Indoor unit number Indoor unit number
Indication Details Indication Details
Reserved
Tens
0 to 1
digit
SEG10
SEG11
Group channel (x16)
Indication Details Indication Details
Reserved
RMC1
0 to 2
SEG6
Units
0 to 9
digit
SEG12
Group address
RMC2
0 to F

Advertisement

Table of Contents
loading

Table of Contents