Before Starting; Power Connection - SchaubLorenz 35l Series Operation Manual

1. BEFORE STARTING

1. Carefully get the product and its accessories out of the box.
2. Remove all packaging materials and promotional stickers.
3. Carefully read the entire operation manual.
4. After transportation or storage at low temperatures it is necessary to keep the
device at room temperature for at least 2 hours before switching on.
5. Wipe the product body with a damp cloth and allow it to dry.
6. Prior to connection, make sure that there are no damages and dents on the
body and inside the internal chamber of the device. The door hinges shall function
properly.
7. Insert the plug into the mains socket.
8. Be sure to keep on-site the warning labels, indicating stickers (if available) and
the serial plate of the product on the body.
Absence of a serial number on the product automatically deprives
you of the right to warranty maintenance.

2. POWER CONNECTION

- Your oven is designed for use in a 230V network at a frequency of 50Hz and a
current rating of 16A. If these indications differ from those of your network,
contact an authorized service center for the device connection.
- Connection of your device to the power circuit shall be made only using an
individual socket with a grounding contact in accordance with the regulatory
enactments. Consult a specialist if the socket with grounding contacts is not
available at the place of location of the appliance.
- While switching for the first time, the mini-oven must be heated at a
temperature of 200 degrees in the well-ventilated premises for not more than 15
minutes. In this case, a slight fogging of the premises is possible due to burning of
protective materials of the heating elements. This is normal occurrence and is not
a manufacturing defect.
- In order to prevent overheating, an empty mini-oven with maximum settings
shall not be switched on for more than 15 minutes. It takes 8-10 minutes to warm
36
EN