Permanent Copy Settings - Sharp AM-900 Online Manual

Permanent Copy Settings

The following copy settings remain in effect until they are changed. These
settings do not revert to the default settings when the auto clear time elapses
or when is pressed.
Default copy quality setting
The default quality setting (page 55) is "TEXT" (this is the setting that is used
if you do not make a selection). If desired, you can change the default quality
setting to "PHOTO".
1
MENU
Press and then
until the display at right appears.
2
Press .
3
Select the default quality setting:
TEXT: PHOTO:
4
Press repeatedly to exit.
Z A
or
Permanent Copy Settings
Display:
COPY SETTING
1: TEXT
The display briefly shows
your selection, then:
2: COPY RESO.
57