Line Monitor - Sharp AM-900 Online Manual

Selecting Temporary Fax Settings
Duplex Scan
Duplex Scan provides a convenient method for faxing multiple two-sided
originals using the auto document feeder. When this setting is selected, after
the stack of originals is fed through the auto document feeder the first time,
you simply turn the stack over (do not change the order of the pages or
remove any pages), insert it into the auto document feeder again, and press
to scan the back side of the originals. The machine will automatically
transmit the pages in the correct order (front of 1st page, back of 1st page,
front of 2nd page, back of 2nd page, etc.).
Note that any blank sides must be included when scanning the pages (if the
number of pages is not equal each time the machine scans the stack, an
error will result).
To select Duplex Scan, press
ON" appears, and then press

Line Monitor

Select this setting when you wish to listen to the line (hear the dial tone, fax
tones, etc.) through the machine's speaker during a fax transmission. This is
useful when you wish to make sure that the receiving machine is responding
correctly.
To select Line Monitor, press
appears in the display.
The Line Monitor setting automatically reverts to the default setting after the
fax transmission is finished.
76
DUPLEX SCAN
once or twice so that "DUPLEX SCAN
.
ENTER
FAX
one or more times until MONITOR ON