Polling (Requesting A Fax Transmission) - Sharp AM-900 Online Manual

Polling (Requesting a Fax Transmission)

Polling (Requesting a Fax Transmission)
Polling allows you to call another fax machine and have it send a document
(previously loaded in the machine's feeder or stored in memory) to your
machine without assistance from the operator of the other machine.
Hint: Polling is useful when you want the receiving fax machine, not the
transmitting fax machine, to bear the cost of the call.
To use the polling function, the other machine must be capable of being
polled.
Before polling, make sure the other machine is set up to receive your
polling request.
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press ) and then press
2
Press .
3
Press .
4
Dial the number of the machine that you want to poll using one of the
following methods:
Enter the full fax number and press
SPEED
Press , enter a 2-digit Speed Dial number, and press
Z
Press or
the number if no name was stored), and press
100
MENU
.
.
A
until the name of the party appears in the display (or
Display:
FAX SETTING
1:RECEPTION MODE
POLLING
ENTER STATION #
.
.