M2TECH LARSON User Manual page 12

M2Tech
LARSON
CLASS-A MONOBLOCK POWER AMPLIFIER
www.m2tech.biz
REVISION P A – MARCH 2022
R
7) Trigger inputs. A 12V trigger signal may be sent to one of this inputs to switch LARSON
on and off by the preamplifier or other trigger source. The two inputs are in parallel,
therefore the unused one may be used to forward the trigger signal to another unit (e.g. to
another LARSON).
8) Output binding posts. Accept bare wire, forks, spades, lugs and bananas. Red is
positive and black is negative.
9) Supply input socket. Connect the stock power adaptor to this socket.
Copyright © 2022, M2Tech Srl
12