Download Print this page

Fusion3 EDGE Quick Start Manual

Hide thumbs Also See for EDGE:

EDGE 3D Printer

EDGE WIRED NETWORKING

Revision 3/10/2022

Table of Contents

Need help?

Do you have a question about the EDGE and is the answer not in the manual?

Page 1 EDGE 3D Printer EDGE WIRED NETWORKING Revision 3/10/2022...
Page 2 Both the STANDARD and SECURE variants of EDGE have built-in wired (ethernet) networking. This can be conﬁgured in two ways: ● As a normal ethernet connection: EDGE is connected to a router, which assigns an IP address & other network parameters to allow communication with the rest of the network.
Page 3 For locations with complex networks and in-house IT teams, you will also want to work closely with them to resolve any network issues encountered. These are often locations with complex networks and network policies that may require changing some default settings in order to put EDGE on the network in accordance with their policies.
Page 4 3. In your computer's network settings, manually conﬁgure your ethernet connection to have the same subnet and an IP address in the same range. a. For example: IP = 192.169.9.2; subnet = 255.255.0.0 b. If you do not know how to adjust your computer's network settings we recommend not using Direct Connection mode.
Page 5 Related Articles / Resources: Tags: edge, setup, networking, wired, ethernet...