Page 2
PACKING DETALS:TOTAL 2 BOXES BOX-1/2 BOX-2/2 PARTS PARTS Hardware...
Page 3
PART Fill the base(F) with water or sand replacethe cap.
Page 4
1.Install the suction cup (G) on the bottom of the base (F) 2.Fix the connector (E )on base(F) with the wrench (J)and the Screw(I) 3.Insert the upper secttion (C) into the Percussion body (D) and set to the desired height.use the butterffly screw to fix the upper section into place.
Need help?
Do you have a question about the A91-120 and is the answer not in the manual?
Questions and answers