Related Manuals for MSA ALTAIR io 4
Summary of Contents for MSA ALTAIR io 4
- Page 1 S S tandards Compliance Certifications ALTAIR io 4 Gas Detection Wearable Order No.: Print Spec: MSAs s afety.com...
-
Page 2: Table Of Contents
Device Cleaning Routine Cleaning Dust and Dirt Exposure Chemical Exposure Water Exposure Notices Bluetooth SIG Statement Conditions for Safe Usage Radio Information Ingress Protection (IP) Charging Certifications and Markings Certifications Calibration Certification Conformance Statement Markings Contained on Label ALTAIR io 4... -
Page 3: Device Cleaning
In the event that the device is immersed in water, allow the sensor inlets time to dry before retesting and returning to service. Drying time is dependent upon humidity conditions and the duration of immersion. ALTAIR io 4... -
Page 4: Notices
Repair or alteration of the device beyond the procedures described in the user guide or by anyone other than a person authorized by MSA, could cause the unit to fail to perform properly. Use only genuine MSA replacement parts when performing any maintenance procedures described in the user guide. -
Page 5: Ingress Protection (Ip)
IP ratings do not imply that the equipment will detect gas during and after exposure to those conditions. Follow the recommendations as described in the ALTAIR io 4 User Guide (P/N 10225884) to determine appropriate calibration interval and maintenance requirements if exposed to conditions representative of the IP Rating. -
Page 6: Certifications And Markings
ALTAIR io 4 Gas Detection Wearable Serial Number and On the ALTAIR io 4, refer to the Device Info menu, and select the "About" screen for the Date instrument serial number and month/year of manufacture. The date of manufacture is also encoded in the serial number found on the ALTAIR io 4 label. -
Page 7: Calibration Certification
MSA’s ISO 9001 Certified Quality System. Conformance Statement MSA certifies that the materials, components, and/or instruments delivered in this shipment conform to all applicable specifications. The items delivered have been processed through the appropriate approved document-controlled procedures for receiving, manufacturing, and inspection. The materials, components and/or instruments were inspected, tested, and calibrated, as applicable, per the associated drawings, standards requirements, and/or specifications, and were deemed acceptable by appropriate authorized personnel. - Page 8 For local MSA contacts, please visit us at MSAsafety.com...
Need help?
Do you have a question about the ALTAIR io 4 and is the answer not in the manual?
Questions and answers