Sanyo VCC-XZ200P Brochure page 57

Matrix Switcher
MPX-MX2005
Monitor
Monitor
System Controller
High Density Scalable Matrix Switcher
SANYO's Matrix Switcher MX Series is a modular security
system based on a microprocessor and supports up to 1,024
inputs and up to 96 outputs with a single matrix system. A
large number of video inputs (10,000) and outputs (1,000) can
be controlled from a single controller.
General
The modular design of the Matrix Switcher makes it easy to
expand the system to a maximum of 16 cards.
Both 4U and 8U rack-mount housing is available for the
switcher with a single 4U bay holding 112 video inputs and 16
outputs.
Modular Construction
The Matrix Switcher is easily expanded using slots for
expansion modules. The housing holds up to 16 cards.
Multi-Protocol Support (SSP-Compatible)
The Matrix Switcher is controllable from SANYO VSP-9000 or
any other SSP-compatible control device. By using the new
Touch Panel Controller with user-friendly graphical user
interface, the user can easily control and set up the Matrix
Switcher. At the same time, the controller can be used to
control other devices supporting SSP protocol, such as
SANYO dome cameras, multiplexers, DVRs and VCRs.
Integration of other devices can be also achieved by the use
of an optional SSP receiver.
Compatibility (Pelco, Ernitec and AD)
The Matrix Switcher also supports
Pan/Tilt/Zoom or dome cameras from different
manufacturers. This makes the switcher
highly compatible and allows the user to
integrate existing cameras into a new system.
Either a fixed camera or a Pan/Tilt/Zoom
camera may be connected to each video
input.
The RS-485 bus system supports up to 128
matrix units on a single bus. The number of
Matrix Switchers that can be controlled using
the TCP/IP protocol for LAN or WAN networks
is almost unlimited.
Matrix Digital Video
Switcher Recorder
Option
Control
Use one of the following options to control the Matrix
Switcher.
1. VSP-9000 controller or any other SSP-compatible controller
2. Any PC on the same network as the matrix via a TCP/IP
connection. The control software is included in the package.
3. Using the optional custom-made software with a graphical
map interface. This software needs to be installed in a PC,
from which control is performed through a TCP/IP
connection.
Network Support and LAN
The Matrix Switcher can be controlled
by using a TCP/IP connection, either
from a touch panel controller or a PC
Camera
and existing networks.
Timer Functions
It is possible to program over 100
camera and monitor tours individually.
Speed Dome Camera
Alarm Management
With an optional order, the system
comes with an external alarm input for
each camera and an external alarm output for each monitor.
Each alarm signal can be configured to call any camera to any
monitor, to put a dome camera to any preset position, or to
start tours or sequences.
MPX-MX2005
482(19.0)
425(16.7)
MODEL MPX-MX2005
Video format PAL / NTSC
Input signal / Input impedance 1.0 Vp-p/ 75Ω
Output signal / Output impedance 1.0 Vp-p/ 75Ω
Video input 64 (up to 1,024 [BNC])
Video output
16 (up to 96 [BNC])
Alarm input
16 (up to DI-1024)
Alarm output 8 (up to DO-512)
Communication
RS-232C, RS-485, USB, Ethernet
Communication speed 19,200bps
PTZ camera control 3 x RS-485
Date. time, video number, video title, monitor status
On screen display
Each up to 20 characters
Text insertion
Dimension 482 (W) x 378 (H) x 172 (D) mm [19.0(W) x 14.9(H) x 6.8(D) in.]
Power requirements / Frequency 100 V to 240 V AC ± 10%, 50 / 60 Hz
NOTE: Specifications subject to change without notice
Extension Box
MPX-EX200
Extension Box with power
MPX-EX210
Video Distribution Box
MPX-EX300
SSP Control System
378(14.9)
370(14.6)
[Unit: mm (inch)]
8ch Main Board
VA-EX8MB
8ch Extension Board
VA-EX8EB
8ch Extension Board w/coaxial
VA-EX8CB
32ch Alarm Board
VA-EX8AB
56