Sanyo VCC-XZ200P Brochure page 37

8 Video loss alarm
When the video signal feed is lost due to one of the
following reasons, a buzzer sounds and the word "VIDEO
LOSS" is displayed on the screen.
1. Wire breakdown
2. Disconnection of video terminal
3. Loss of power on a camera or other intermediary
equipment
9 Disk full alarm
During a recording, an alarm can be set to give off a buzzer
sound, along with a message on the display.
10
Fan error / Disk error
A beep will sound when an error occurs on the fan or the
disk.
11
Time / Date search
Searching recorded pictures is available by specifying the
time and date.
12 Alarm search
A list of up to 8 stored recordings (alarm number, recording
date and time) along with a preview window offers the
user an easy way of searching and playing back a particular
event. You can easily switch to a full screen display and
display a still picture, or perform a fast-forward search
simply by turning the shuttle or jog dial.
13 Alarm thumbnail search
It is possible to display up to 9 thumbnails for video
recordings in the alarm area along with their respective
alarm numbers. This feature allows the user to search for a
particular event without playing back each recording.
14 Alarm log search
A search is narrowed using a log file by selecting the time,
minute, month, and the day of the week on a GUI, and
then the desired scene can be selected.
*Only DSR-5009PA, DSR-5016PA, DSR-5709P and DSR-5716P
15 Motion detection search
By setting a motion sensor on the screen, any scene with
motion in the specified area will be brought up for further
review.
*Does not apply to DSR-M810PA and DSR-M814PA
16 Archive area search
A list of up to 8 stored recordings (copied to archive area,
recording date and time), along with a preview window,
offers the user an easy way of searching and playing back
a particular event. You can easily switch to a full screen
display and show a still picture, or perform a fast-forward
search simply by turning the shuttle or jog dial.
*Does not apply to DSR-M810PA, DSR-M814PA, DSR-2004, DSR-2016 and
DSR-HB8000
17 Camera telemetry
The DVR front panel can be used to control connected
cameras.
*Does not apply to DSR-3706PA, DSR-300P, DSR-M810PA and
DSR-M814PA
Clock adjustment
18
If multiple Recorders are used, using this feature forces
timers on all machines to be synchronized to the master
Recorder once a day at the preset time.
Security lock
19
To prevent unauthorized manipulation or accidental
operation while recording, the user can lock the
functionality of the operation buttons, the jog dial, and the
shuttle ring. There are two types of security lock: a quick
method security lock and a 4 digit security lock.
Auto Delete Function
20
The allows the user to specify the storage period for each
video clip, from one day up to 99 days.
When the specified period expires, the data will be
automatically deleted.
21 30-day memory back-up
A built-in lithium battery is used to protect various DVR
settings for 30 days.
22 Lifetime counter
The monitor screen displays "used-time" counter (total
power-on time.)
Buzzer
23
An alarm is indicated by a beep.
24 SMTP
An alarm can trigger an e-mail message sent to a preset
address.
25 Series Connection
DSR series facilitates channel by channel series connection
between multiple units through the connection of each
channel's VIDEO IN/OUT terminals, along with the
connection of the SERIES IN/OUT terminals. When the
master DVR runs out of storage capacity, recording
automatically switches to the second DVR and onward to
enable unlimited expansion of storage capacity and
recording time.
VGA output
26
USB terminal
USB
Useful in connecting an external disk writer and/or CF
reader.
* Does not apply to DSR-300P
CF slot
CF
Increases data portability and MENU
downloading/uploading by allowing the use of a compact
flash memory or a microdrive.
Network
Network terminal
There is a built-in 100BASE-TX / 10-BASE-T LAN terminal,
allowing remote surveillance / control from PC via LAN.
SSP
SSP (RS-485/422) compatible
By using SSP (SANYO Security Serial Protocol), cameras,
multiplexers, DVRs and VCRs in a daisy chain over a
distance of up to 1200m (4000 feet) can be controlled
centrally with just one controller.
RS-232C compatible
RS-232C
With RS-232C compatible recorders various operations are
possible from an external computer.
Digital Video Recorder
36