Connections - Sanyo SRC-800 Instruction Manual

CONNECTIONS

Connect the video camera and monitor TV as shown in the figure below.
NOTE:
Before making the connections, make sure all the devices are disconnected from the power outlet.
Power Cord Installation
1
Plug the supplied power cord firmly into the AC power
input AC IN socket.
2
Insert the plug of this power cord into a outlet.
About the memory reset
If the VCR location is changed or to cancel previous
settings, please reset the memory as described below.
The time and date will be reset.
To reset the memory, press the ALL RESET button.
Video camera
(sold separately)
From an external
audio source
AC IN ~
PUSH
OPEN
Power cord
To outlet
To
VIDEO IN
jack
CLOCK SET SERIES
OUT IN COM OUT IN
AUDIO VIDEO
IN
IN
OUT
REMOTE MIC IN
OUT
To
VIDEO OUT
jack
Coaxial cable
(sold separately)
NOTE:
For more details, please refer to the manuals
accompanying all other devices. If the connections are
not made properly, it may cause a fire or damage the
equipment.
7
Monitor TV (sold separately)