Changing The On-Screen Display - Sanyo SRC-800 Instruction Manual

CHANGING THE ON-SCREEN DISPLAY

Selecting the On-screen Display
You can select to display or not the date and time.
1
Turn the power on to all devices used.
2
Press the MENU button until the (SET UP 2) menu is
displayed.
<SET UP 2>
¤DISPLAY
DATE
TIME
ALARM COUNT
¤TAPE IN MODE
¤TAPE END MODE
¤TAPE END OUT
¤SERIES REC
¤EJECT MODE
¤THREAD CHECK
3
Press the ] button, until the desired item for which
the display function will be set is flashing.
4
Press the l (or j) button to set "Y" for the functions
described below.
DATE . . . . . . . . . . . . The date is displayed
TIME . . . . . . . . . . . . The time is displayed
5
Press the PAUSE/SEARCH button, the normal
screen is displayed.
The setting procedure is now completed.
°
NOTE:
If the ON SCREEN switch is set to the "ON" position,
the items for which "Y" is set are recorded. The items
for which "N" was set at step 4 above are not recorded.
Y
Y
Y
STOP
REW
-3M
N
EJECT 1
Y
10
Changing the Date/Time Display Position
1
Turn the power on to all devices used.
2
Set the ON SCREEN switch to the "ON" position.
The date and time are displayed.
°
Date/Time display
10-15-99 FRI
15:20:00
3
Press the « (or ]) button.
The display will move towards the right (or the
°
bottom).
NOTES:
If the « (or ]) button is kept pressed for 1 second or
more the display will move at a faster speed.
The display position cannot be changed while recording.