Setting The Security Lock; Clock Adjustment - Sanyo SRC-800 Instruction Manual

SETTING THE SECURITY LOCK

The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertenly.
1
While holding the TRACKING/V.STILL + button,
press the l button.
"ö" is displayed on the digital display.
°
To cancel the security lock, while holding the
TRACKING/V.STILL + button, press the l button, "ö"
will be erased from the digital display.

CLOCK ADJUSTMENT

When using 2 or more VCRs of this same model, the
clock on the second VCR and on, can be synchronized
with the clock on the first VCR, using the CLOCK
ADJUSTMENT function.
1
Connect the CLOCK SET OUT terminal on VCR 1 to
the CLOCK SET IN terminal on VCR 2.
2
Repeat the procedure for all the other VCRs,
connecting the CLOCK SET OUT terminal on VCR 2
to the CLOCK SET IN terminal on VCR 3, and so on.
3
Press the MENU button until the (SET UP 2) menu is
displayed.
4
Press the ] button, until the "EXT TIME ADJ." (time
of the adjustment) setting is flashing.
5
Press the l (or j) button to set the hour at which the
adjustment will be conducted.
NOTES:
Be sure to set the same time on all the VCRs.
The clock adjustment cannot be set to "00 : 00".
NOTES:
While the security lock is engaged all commands,
except the one to cancel the security lock, are disabled.
The security lock cannot be engaged while a menu is
displayed.
¤DISPLAY
DATE
TIME
¤EXT TIME ADJ.
¤TAPE IN MODE
¤TAPE END MODE
¤TAPE END OUT
¤SERIES REC
¤EJECT MODE
6
Press the PAUSE/SEARCH button, the normal
screen is displayed.
The setting procedure on the first VCR is now
°
completed.
7
Repeat the procedure for all the other VCRs, setting
"EXT TIME ADJ." (to the same time as set on the first
VCR).
NOTE:
Connect the COM terminal on all VCRs used.
18
Example
<SET UP 2>
Y
Y
03:00
STOP
REW
-3M
N
EJECT 1