Configuring The Server - BITMAIN T19 Hydro Server Installation Manual

3.

Configuring the Server

Setting up the Pool
To configure the server:
1. Click Settings as below.
2. Set the options according to the following table.
Option
Mining address
Name
Password (optional)
3. Click Save after the configuration.
Enter the address of your desired pool.
The T19 Hydro servers can be set up with three mining pools, with decreasing
priority from the first pool (pool 1) to the third pool (pool 3). The pools with low
priority will only be used if all higher priority pools are offline.
Your worker ID on the selected pool.
The password for your selected worker.
- 11 -
T19 Hydro Server Installation Guide
Description
3. Configuring the Server