Configuring The Server - BITMAIN ANTMAINER S19j Server Installation Manual

3.

Configuring the Server

Setting up the Pool
To configure the server:
1. Click Settings marked below.
Note:
Fan speed percentage can be adjusted, but we recommend to keep the default setting. The server will
adjust the fan speed automatically if the fan speed percentage has yet been selected.
2. Set the options according to the following table:
Option
Mining address
Name
Password (optional)
3. Click Save after the configuration.
Enter the address of your desired pool.
The S19j servers can be set up with three mining pools, with decreasing priority
from the first pool (pool 1) to the third pool (pool 3). The pools with low priority
will only be used if all higher priority pools are offline.
Your worker ID on the selected pool.
The password for your selected worker.
- 15 -
Description
S19j Server Installation Guide
3. Configuring the Server